 |
Electronic Depth Gage The Only American Made Electronic Depth Gage ... This gage is light and easy to use for depth measurements in its range. Also, all measurement information can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation (refer to the Electronic Data Section). More Info... |
 |
Dial Depth Gages These depth gages are ideal for the individual mechanic. They are light, reliable and accurate for measurements to .001" or 0.02 mm and will fit into most toolboxes. Readability Features Sharp, easy-to-read dial graduations of .001-.100" or 0.02-2 mm in one revolution Sharp, black graduations on the satin chrome finished bar, every .100" or 1 mm |
|
|
Vernier Depth Gages These are easy-to-use, very accurate depth gages. They are designed for measuring the depths of holes, slots, and recesses and for inspecting jig, fixtures, and die work. They are also ideal for measuring from a plane surface to toolmakers' buttons for locating center distances. Readings are in .001" and 0.02 mm. Heads are hardened, ground, and lapped Measuring blades are hardened and ground and have accurate and sharp machine divided graduations |
 |
Steel Rule Depth Gages These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2 mm by simply adjusting the rule to the required depth. The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule. These rules are either our No. 610N (6 inch) or our No. 635N (150 mm) models Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements 6" hook rule (No. 236HC, EDP 51077) also available, permitting easier readings from the edge of a workpiece to the edges of slots, shoulders, etc. Graduated in 32nds, 64ths |
 |
Combination Steel Rule
Depth and Angle Gages This depth gage has an added feature permitting its use as a protractor for measuring angles. It is a simple, handy tool that is a welcome addition to any machinist's tool box. More Info... |
 |
Depth Gage Bases These different bases are for mounting indicators with a 3/8" (9.5 mm) stem (No. 25SC38 Stem Collet included) or an 8 mm stem with optional No. 25MSB Split Bushing. |
