 |
DIGI-CHEK II Height Master These are the world's fastest and most precise height masters, ideal for those who need the highest degree of accuracy over an extremely long vertical range. Can be used in the laboratory or on the shop floor Lower inspection cost by saving time – within 10 seconds the tool can be set into position The gage block stack is free-standing, so it will adapt to temperature differences in a reasonable time period 1" or 25 mm range of adjustment Reverse reading block allows readings from the underside of the master gage blocks The large, remote digital readout can be placed in the most convenient location and adjusted for best readability The housing is heavy and extremely stable. It has hardened and lapped three-point bearings |
 |
DIGI-CHEK Height
Gages These gages combine the accuracy of Starrett-Webber Gage Blocks with a precision micrometer head and digital readout. More Info... |
 |
Altissimo™ Electronic
Height Gages These electronic height gages are high on innovation and ease of use – loaded with the Starrett-exclusive functions you need to make your measuring routines run smoothly and reliably. |
 |
Electronic Height Gages
(with output) The No. 755 Electronic Height Gages provide measuring information directly to Starrett SPC Plus® Data Collection Systems for analysis, data collection and hard copy documentation. More Info... |
 |
Electronic Digital
Height Gages (with output) These Electronic Height Gages provide a versatile and economic solution for most height measurement applications. All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation. More Info... |
 |
Electronic Height Gage,
0-24" Range No. 3752 Series The new 3752 Electronic Height Gage is a full featured, versatile and economic solution for most height measurement applications. All measuring information from these tools can be entered diretly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation. More Info... |
 |
Digital / Dial Height
Gage This is one of the fastest and most reliable height gages for its range (24") and accuracy (within .001" at any location). Readability Features Read the clear, properly sized counter for inches and tenths of an inch (Eg. 4.2") Next read directly to .001" on the dial, which has 100 sharp, clear graduations Ability to reset the measurements to zero at any point on the dial Reset can be for the up or down direction as desired The scriber and base are designed so that the tool will read directly from zero (the bottom of the base) |
 |
Master Vernier Height
Gages This Master Vernier Height Gage is the ultimate in height gage design and is the experienced craftsman's friend. It is a rugged and reliable tool that gives precise and dependable measurements over long ranges. This tool is accurate, has the easiest reading vernier style, is stronger, and is offered in greater ranges than other height gages. Readability Features Long, 50-division vernier scales made popular by Starrett. This feature permits just half as many bar graduations as conventional single vernier tools. These widely spaced graduations make possible easy reading to .001" or 0.02 mm without needing a magnifying glass Flush fitting of the vernier scales to the main scale means that these are in the same plane, which eliminates parallax. Vernier scales are adjustable Black lines and figures against Starrett satin chrome finish make reading a pleasure, not an effort The scriber and base are designed for direct reading from zero (bottom of base) |
 |
Vernier Height Gages This tool is the "baby brother" of the No. 254 Master Vernier Height Gage. It is essentially the same tool, but a much lighter version for normal use where heavy duty applications are not practical. The 18" and 450 mm models weigh 3 1/4 lbs. (1.5 kg.). No other height gage features this favorable combination of design, weight and accuracy. Readability Features Long, 50-division vernier scales that can be read to .001" or 0.02 mm without a magnifying glass Flush-fitting of the vernier scales to the main scale eliminates parallax Easy-reading sharp black lines and figures against Starrett satin chrome finish background The scriber and the base are designed so that the gage will read directly from zero |
 |
Electronic Height Gage
(with output) This height gage is light, portable and easy to use for vertical measurements within its range. Also, all measurement information can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation. Readability Features Exclusive Starrett-designed microprocessor chip Hardened, stainless steel bar for long life Depth attachment No. PT08680A available for measuring depth of holes, slots, and recesses Fine adjustment thumb roll for precision measurements The auxiliary scriber has a rounded nose for cutting clean, sharp lines with smoothness and less pressure. This is an original Starrett feature Lock to hold the slide in position Hardened, ground, and lapped base with finger grooves to provide ease of movement One-year minimum battery life with two furnished 3-volt batteries, No. CR2032 Linear Accuracy: ± .001" (± 0.03 mm); Resolution: .0005" (0.01 mm) Vertical bar is back from the edge of the nose for better stability Nose is designed to let the scriber reference zero from the bottom of the base to get the full 6" (150 mm) usable range |
 |
Dial Height Gages This compact height gage has universal appeal for virtually all machinists and inspectors. It is simple to use, reliable, accurate, and fits into most toolboxes. Readability Features Sharp, clear dial graduations of .001" or 0.02 mm – .100" or 2 mm in one revolution Sharp, black graduations on the satin chrome finished bar every .100" or 1 mm Accuracy and Long-Life Features Hardened, stainless steel bar, rack, gears, scriber, and scriber carrier Positive split gear anti-backlash control |
 |
Stem-Mount Indicator
Attachment for Height Gages This attachment replaces the standard scriber and provides a way to mount dial indicators or LVTD style probes having 3/8" diameter shafts onto your height gage. By using the lower stem of the indicator as an attachment point, the indicator can be used to guarantee the amount of down pressure on the part is the same as the original set zero position. |
 |
Offset Scribers for
Starrett No. 454 Vernier Height Gages Offset scribers allow measuring from the bottom of the height gage base, over and under shoulders, and in places inaccessible to the straight scriber. With the offset inverted, measurements can be taken and lines scribed beyond the normal range of the gage. |
 |
Circular Carbide Scribers Cuts a sharper and cleaner line with less pressure than any other scriber Resists breakage and chipping but can be rotated for wear Another Starrett original |
 |
Universal Precision Gage his versatile gage was specifically designed for gage makers, inspectors, tool and die makers and machinists. There is no other similar gage available that combines the design, accuracy and usefulness of this tool for fine height setting and transfer within its range. Features and attachments that make this a truly universal gage are – Scriber Attachment that can be used as a height gage for comparison measuring with test indicators, or as a surface gage for scribing – an offset attachment or "foot" that permits setting in narrow areas or working 1/8" (3.2 mm) below the base line – and 1" (25.4 mm) and 3" (76.2 mm) extensions to increase the measuring range |
 |
Planer and Shaper Gage This gage is similar to our No. 995 Gage except that it has a different slide with no fine adjustment and no attachments. It has the same exclusive flat and "V" three point way design All working surfaces are hardened and ground to the same close tolerance as the No. 995 Tool has the same stable base 3/4" W x 5 1/4" L (19 x 130 mm) as the No. 995 Range With 3" and 1" Extensions Range Without Extensions 10 1/4" (260 mm) 6 1/4" (158 mm) |