Digital Indicator for Load and Torque Measurements
The Chatillon® DFS-R-ND Series supplies accurate load and torque measurement in a common gauge. Ideal for handheld or test stand applications, the DFS-R-ND may be equipped with smart loadcells or torque sensors. The auto-recognition feature knows whether a load or torque measurement is required. Measurement accuracy is better than 0.25% full scale (higher accuracy available). A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, sensor actuation and direction. Measurements are displayed in ozf, gf, lbf, kgf and N units or oz-in, g-cm, lb-in, N-cm and N-m units. The DFS-R-ND gauge comes standard with our NEXYGEN gauge software, RS-232 cable, carrying case, battery adapter/charger, and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard with sensors.
Standard Gauge Measurement Functions (Requires Sensor)
- Normal Tensile, Compression and Torque Measurement
- Peak Tension, Compression and Torque Measurement
- Sharp and % Break Detection
- Contact Closure
- Pass-Fail Limits
- High & Low Setpoint Limits
- Load Average
- Time Average
- Load Comparison
- Statistical Calculations
Common Accessories
| Type | Part No. |
Capacity
|
Thread
|
Mates To
|
Standard
|
| Chisel Point | SPK-FMG-008A |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Point | SPK-FMG-009A |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Notch | SPK-FMG-010A |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Flat | SPK-FMG-011A |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Hook | SPK-FMG-012A |
50 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Hook | SPK-FMG-012B |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Extension Rod | SPK-FMG-013A |
100 lbf
|
#10-32F
|
#10-32M
|
Option
|
| Chisel Point | SPK-FMG-008B |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Point | SPK-FMG-009B |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Notch | SPK-FMG-010B |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Flat | SPK-FMG-011B |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Hook | SPK-FMG-012C |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Extension Rod | SPK-FMG-013B |
500 lbf
|
5/16-18F
|
5/16-18M
|
Option
|
| Battery Charger, 120V | SPK-DF-US120 |
US Plug
|
|
|
Yes
|
| Battery Charger, 230V | SPK-DF-UK230 |
UK Plug
|
|
|
Yes
|
| Battery Charger, 230V | SPK-DF-UK230 |
EU Plug
|
|
|
Yes
|
| Carrying Case | SPK-DF-118 |
|
|
|
Yes
|
The DFS-R-ND Series replaced these force gauge models:
- Chatillon
DFGS-R-ND Series
- Chatillon DFA-R-ND Series
- Chatillon DTG Series
Sensor Types
- SLC Series Loadcell Sensors (For Force Measurement)
- STS Series Torque Sensors (For Torque Measurement)