Grips and Fixtures

TG24

Metal Dumbell and Plate Sampling Chucks

These grips are specifically made high tension, flat plate, metal dumbell samples. Samples require drilled clearance holes in either end to accept clamping disks. Diameter hole of 7.94mm(0.31 in.)in diameter maximum sample width is 35mm(1.38 in.)maximum sample thickness 0f 6mm (0.23 in.)

Specification
Maximum Capacity 20 kN 4496 lbf
Minimum Load Cell 100 N 4.5 lbf
Clamp Diameter 38 mm 1.5 in
Maximum Sample Width 35 mm 1.4 in
Maximum Sample Thickness 6 mm 0.24 in
Eye End Diameter 15.85 mm 0.62 in
Weight Each 0.7 Kg 1.54 lb
Length Each 85 mm 3.35 in
Temperature Limits Ambient

packaging includes upper and lower grips.

Applications include straining a metal dumbell sample by tensile force, generally to fracture.

Applications

• Straining a metal dumbbell sample, by tensile force, generally to fracture, and recording the relationship between force and extension to determine one or more of the following mechanical properties Elongation Stress Percentage Elongation Tensile Strength Extension Yield Stress Percentage yield point extension Proof Stress Maximum force Young’s Modulus of Elasticityures